Max GS865E Manual De Operaciones Y Mantenimiento página 22

Hook
Hexagon Socket
Head Bolt
Fuel Cover
2
1
Jet Nozzle
Fuel Cell
Latch
CHANGING THE HOOK DIRECTION
WARNING:
● Remove the Fuel Cell and Battery.
The Hook can be directed in the two directions. Remove the hexagon socket head bolts
with hexagonal wrench, change the direction, and then, put back the bolts to
reassemble.
REPLACING THE FUEL CELL
If the Fuel Gas is running out, the pins cannot be driven.
WARNING:
● Be sure to release the Trigger.
● Do not press the Contact Arm against the object.
q Push up and pull the Fuel Cover to this side to open it.
w Nip the Metering Valve and remove the used Fuel Cell.
e Set the new Fuel Cell.
(See Page 18 for the setting method)
REPLACING THE BATTERY
If the Battery is running out, the red LED of the tool will be turned on.
WARNING:
● Be sure to remove the Fuel Cell.
● Release the Trigger.
● Do not press the Contact Arm against the object.
q Firmly holding the main body, press the latches on both sides of the Battery to
remove it.
Battery
22