Input" Menu; Info" Menu - Sartorius Entris BCE6202 Instrucciones De Manejo

System Settings

7.3.20 "INPUT" Menu

Parameter Setting values Setting values
DEV . ID
LOT ID PRINT
CONTENT**
SPL . ID PRINT
START****
MODE**
DATE
TIME
PW . USER
PW . DEL .****
PW . SERV .
CAL .WT .
INTERV .
* Factory setting
** Only visible if "PRINT"/"ON" is selected
*** Only possible if "BARCODE" is selected (see Chapter "7 .3 .3 "DEVICE"/"RS232" Menu", page 20)
**** Only visible if "SPL . ID"/"MODE"/"SCAN" is not selected . Only visible if the user password is available .

7.3.21 "INFO" Menu

Parameter Setting values
VER . NO .
SER . NO .
Model
BAC VER .
* Factory setting
26 Entris ® BCE Operating Instructions
Explanation
Max 14 Saves the entered ID number for the device .
characters 09-0,
A-Z, - , empty
ON Activates the output of the lot ID number during GLP output .
OFF* Deactivates the output of the lot ID number during GLP output .
Max 14 Content of the LOT ID .
characters 09-0,
empty
ON Activates the output of the SPL . ID number during GLP output .
OFF* Deactivates the output of the SPL . ID number during GLP output .
Max 14 Start value of the SPL . ID .
characters 09-0,
A-Z, - , empty
COUNT .UP* The SPL . ID number is counted up on each printout .
COUNT .DN The SPL . ID number is counted down on each printout .
SCAN*** The SPL . ID number is read in by the barcode scanner . Printing then occurs
automatically .
Saves the entered date .
Saves the entered time .
Max 7 Saves the entered user password .
characters 09-0,
A-Z, - , empty
YES Deletes the entered password .
NO* Does not delete the entered password .
Max 7 Activates service mode .
characters 09-0,
A-Z, - , empty
Changes the calibration weight for the adjustment or calibration process with
the user-defined weight value .
The SBI output rate can be set from 0 - 9999 seconds .
Explanation
Displays the version number of the control module .
Displays the serial number of the device .
Displays the type designation of the device .
Displays the version number of the weight sensor .