20 | English
Application tool
ACZ 70 RD4
Starlock
70 mm diameter
Carbide-RIFF seg-
ment saw blade for
mortar and abras-
ive materials
ACZ 85 RD4
Starlock
85 mm diameter
Diamond-RIFF seg-
ment saw blade for
mortar and abras-
ive materials
AVZ 70 RT4
Starlock
70 mm wide
carbide-RIFF mor-
tar remover
AVZ 90 RT2
Starlock
90 mm wide
carbide-RIFF delta
plate for mortar
and abrasive ma-
terials
AVZ 93 G
Starlock
93 mm-wide sand-
ing plate for sand-
ing sheets of the
Delta 93 mm series
AUZ 70 G
Starlock
70 mm wide profile
sander for
70 × 125 mm
sanding sheets
AVZ 32 RT4
Starlock
32 × 50 mm
carbide-RIFF sand-
ing finger for wood
and paint
AIZ 28 SC
Starlock
28 × 40 mm HCS
universal joint cut-
ter
ASZ 32 SC
Starlock
24 mm-wide HCS
pull cutting edge,
1 609 92A 5V6 | (20.08.2020)
Material
Thin tile joints, porous
concrete, soft brick, ce-
ment fibreboards, fibre-
glass-reinforced plastics,
epoxy
Cement joints, soft wall
tiles, fibreglass-reinforced
plastics, epoxy, GRP
Mortar, joints, epoxy
resin, fibreglass-rein-
forced plastics, abrasive
materials
Mortar, concrete residue,
wood, abrasive materials,
paint
Depends on the sanding
sheet
Wood, pipes/profiles,
paint, varnish, filler, metal
Wood, paint
Expansion joints, window
putty, insulation materials
(rock wool)
Roofing felt, carpets, arti-
ficial turf, cardboard, PVC
flooring
Application
Cutting and separating with a particularly thin blade
(1.6 mm) in areas and corners that are close to the edge
or difficult to access, long service life thanks to Carbide-
RIFF;
Example: Removing joints between wall tiles for repair
work, recesses in tiles;
also available as a version for normal joints: ACZ 85 RT3
Cutting and separating in areas and corners that are close
to the edge or difficult to access, long service life thanks to
Diamond-RIFF;
Example: Removing joints between wall tiles for repair
work, recesses in tiles
Reaming and separating joint and tile material, as well as
rasping and sanding on a hard substrate; long service life
thanks to BOSCH carbide technology;
Example: Removing tile adhesive and grout
Rasping and sanding on a hard substrate;
Example: Removing mortar or tile adhesive (e.g. when re-
placing damaged tiles), removing carpet adhesive
residues, removing paint residues;
available in grain sizes 20 (RT2), 40 (RT4), 60 (RT6) or
100 (RT10)
Sanding on edges, in corners or in difficult-to-access
areas;
depending on sanding sheet, e.g. for sanding wood, paint,
lacquer, stone;
non-woven materials for cleaning and for structuring
wood, removing rust from metal and for abrading lac-
quers, polishing felt for pre-polishing
Convenient and efficient sanding of profiles and curved,
uneven material surfaces up to a diameter of 55 mm;
sanding sheets for sanding wood, pipes/profiles, varnish,
filler and metal
Sanding wood or paint in difficult-to-access places without
sanding paper; long service life thanks to BOSCH carbide
technology;
Example: Sanding down paint between window shutter
slats, sanding wooden flooring in corners;
available in grain sizes 40 (RT4) and 100 (RT10)
Cutting soft materials;
example: Cutting silicone expansion joints or window
putty
Quick and precise cutting of soft material and flexible, ab-
rasive materials;
Example: Cutting carpets, cardboard, PVC flooring, re-
cesses in roofing felt
Bosch Power Tools