Bosch GSR 12V-15 FC Professional Manual Original página 796

Ocultar thumbs Ver también para GSR 12V-15 FC Professional:
Tabla de contenido

Publicidad

Do not touch grinding and cutting discs until they have
u
cooled down. The discs can become very hot while work-
ing.
Release the On/Off switch and set it to the Off posi-
u
tion when the power supply is interrupted, e.g. when
the battery pack is removed. This prevents uncontrolled
restarting.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Do not touch grinding discs until they have cooled
u
down. The discs can become very hot while working.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting and roughing of metal,
stone and wood materials, plastics, non-ferrous metals and
tiles without the use of water. A specific protective guard
must be used when cutting.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Direction of rotation arrow on housing
(2) Spindle lock button
(3) On/off switch
A)
(4) Battery
Bosch Power Tools
(5) Battery release button
(6) Battery charge indicator
(7) Protective guard for grinding
(8) Grinding spindle
(9) Handle (insulated gripping surface)
(10) Protective guard for cutting
(11) Clamping bolt with washer
A)
(12) Cutting disc
(13) Hex key
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Grinder
Article number
Rated voltage
A)
Rated speed
Max. grinding disc diameter
Mounting diameter
Weight according to EPTA-
B)
Procedure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient temper-
C)
ature during operation
and
during storage
Recommended re-
chargeable batteries
Recommended battery
chargers
A) Rated speed in accordance with EN 60745-2-3
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3.
Typically, the A-weighted sound pressure level of the power
tool is 75 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
Surface grinding (roughing):
2
a
 = 13.5 m/s
, K = 1.5 m/s
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
English | 17
A)
A)
GWS 12V-76
3 601 JF2 0..
V=
-1
min
19,500
mm
mm
kg
0.70–0.90
°C
0 to +35
°C
–20 to +50
GBA 12V...
GAL 12...
GAX 18...
2
,
1 609 92A 5WJ | (19.08.2020)
12
76
10

Publicidad

Tabla de contenido
loading

Tabla de contenido