Bosch GSR 12V-15 FC Professional Manual Original página 244

Application tool
AIZ 32 BSPB
Starlock
32 × 50 mm bi-
metal plunge cut
saw blade for hard-
wood
AIZ 32 AT/
AIZ 32 AIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for metal
AIZ 32 APT/
AIZ 32 APIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for
multi-material
AYZ 53 BPB
Starlock
53 × 40 mm
plunge cut saw
blade for multi-
material
AII 65 APB
Starlock
65 × 40 mm bi-
metal plunge cut
saw blade for wood
and metal
ACZ 85 EB
Starlock
85 mm diameter
bimetal segment
saw blade for wood
and metal
ACZ 100 SWB
Starlock
100 mm diameter
bimetal segment
serrated knife for
multi-material
ACZ 105 ET
Starlock
105 mm diameter
carbide segment
saw blade for
multi-material
Bosch Power Tools
Material
profiles with small dimen-
sions
Hardwood, laminated
boards
Hard ferrous metals, ex-
tremely abrasive materi-
als, fibreglass, plaster-
board, cement-bonded
fibreboards, hardened
nails and screws
Hard ferrous sheet metal,
epoxy, plasterboard,
GFRP, CFRP, cement
fibreboard
Gypsum boards, chip-
boards, sandwich mater-
ial, wood
Softwood, hardwood,
veneered boards, plastic-
coated boards, non-
hardened nails and bolts
Wooden materials,
plastic, soft and non-fer-
rous metals
Insulation material, insula-
tion boards, floor panels,
impact sound insulation
boards, cardboard, car-
pets, rubber, leather
Fibre cement boards, tile
joints, brick, fibreglass-re-
inforced plastics, lamin-
ate
Application
Splinter-free separation and plunge cuts in coated boards
or hardwood thanks to round sawing edge (Curved-Tec),
Japan toothing specially suited for hardwood;
Example: Installation of skylights, recess for plug sockets
Sawing extremely abrasive materials or hard ferrous
metals; long service life thanks to BOSCH carbide techno-
logy;
Example: Cutting of kitchen front covers, simple sawing
through hardened nails and stainless steel
Splinter-free separating cuts and plunge cuts in sheet
metal thanks to round sawing edge (Curved-Tec); long ser-
vice life thanks to BOSCH carbide technology;
Example: Sawing through sheet metal, cutting through
screws in window frames
Optimised for plunge saw cuts with a subsequent longer
separation cut; the Dual-Tec shape ensures a clean and
complete cut both in the corners and during a longer sep-
aration cut;
Example: Plug socket recesses in gypsum boards or
wooden walls
Splinter-free separation and plunge cuts thanks to round
sawing edge (Curved-Tec) in coated boards or hardwood;
Example: Shortening door frames, recesses in laminate
flooring for a tray or built-in furniture, cutting through non-
hardened nails and bolts when flush with the surface
Separation and plunge saw cuts;
also for sawing close to the edge in difficult-to-access
areas;
Example: Shortening already installed skirting boards or
door frames, plunge cuts when adapting floor panels
Precise cutting of soft materials;
example: Cutting insulation boards to size, cutting pro-
truding insulation material to length so that it is flush with
the surface
Separation and plunge saw cuts; also for sawing close to
the edge in difficult-to-access areas; long service life
thanks to BOSCH carbide technology;
Example: Shortening already installed skirting boards or
door frames, milling cable ducts in brick, quick and low-
dust cutting out of tile joints, cutting fibreglass boards to
size for fittings, adjustment work in laminate; available
from mid-2021
English | 19
1 609 92A 5V6 | (20.08.2020)