Bestron ABL930SR Manual Del Usuario página 25

instruction manual
5. Press the button to open the bottom flap (see figure 7B+C).
6. If so required, use your hand to remove any waste sticking to the container.
7. Close the bottom flap, and press until it clicks into place.
8. Fit the dust container onto the appliance, and click it into position.
cleAninG And mAintenAnce - cleaning or replacing the filter
For best results clean or replace the filter after every second or third use of the vacuum cleaner, or more
frequently if the filter is visibly blocked.
Clean the filter regularly to avoid that the filter becomes clogged and the engine overheated.
1. Remove the waste from the dust container (see
"Removing waste from the dust container").
2. Open the filter lid (B).
3. Take the dust separation system (B+C) from the
dust container (A).
4. Take the filter from the dust separation system
(D).
5. Rinse the filter and the dust separation system
thoroughly in lukewarm water.
6. Allow the filter to dry thoroughly.
7. Mount the holders and filters in the reverse
sequence.
• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
• Do not clean the filter in a washing machine.
• Do not dry the filter with a hairdryer.
cleAninG And mAintenAnce - cleaning or replacing the exhaust filter
Replace the exhaust filter at least twice a year, and more frequently if the filter is visibly blocked.
1. Remove the plug from the wall socket.
2. Open the cover of the exhaust filter wheel cap
by turning it to the left. Pull the exhaust filter
from the device, see figure 9.
3. Rinse the filter in lukewarm water. Allow it to dry
thoroughly.
4. Return the cleaned filter to the appliance. Close
the cover, and turn right until it clicks into place.
Water could penetrate into the appliance if the
filters are not thoroughly dry. This could result in
(electrical) damage.
the environment
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user's instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
D
C
25
B
A