Software Update; Resetting The Parameters; Door Station Settings - SOMFY V 350 Manual De Instalacion Y Uso

V®350 video entry phone
Press the touch-sensitive key corresponding to validate
When "100%" is displayed in the yellow zone at the bottom of the
screen, the transfer is complete.
Press the touch-sensitive key corresponding to
settings screen or the key corresponding to
screen.
Note: the photos are not deleted from the monitor. To delete the
photos, see "6.1.4 Stored photos of visitors".

Software update

The screen displays the current software version.
To update the monitor software (firmware), you must first retrieve the
latest version from our website and copy it onto an SD micro card, for
example:
316M_SF1_t1.0.8_2019_11_14
Create a directory on the SD micro card named "update" and save the
new firmware to this directory.
Insert the SD micro card in the monitor then validate the action.
Note: the parameters return to the "factory" settings and the photos
and RTS equipment are conserved.

Resetting the parameters

This action deletes all personalised settings.
To be able to reuse the video entry phone, you must reconfigure the
basic settings (date, time, ring tone melody, ring tone volume).
Note: the parameters return to the "factory" settings and the photos
and RTS equipment are conserved.
6.2 Door station settings
6.2.1 Setting the speaker volume
To adjust the door station speaker volume, use the screwdriver
supplied to turn the button on the back of the door station:
• clockwise to increase the volume.
• anti-clockwise to reduce the volume.
6.2.2 Activating or deactivating the audible beep
of the call button:
An audible beep sounds when the call button is pressed.
To deactivate or reactivate this beep, press the call button for 5
seconds until the status confirmation beep is heard.
Copyright© 2021 SOMFY ACTIVITES SA. All rights reserved.
.
to return to the
to return to the start
EN
Button to
adjust the
speaker
volume
22