Starting / Stopping The Engine - Stihl BT 45 Manual De Instrucciones

English
Starting / Stopping the
Engine
Set rotary knob to N (gearbox in
N
neutral).
WARNING
The machine may only be started with
the gearbox in neutral. If left in positions
1, 2 and R, the drilling tool may begin to
rotate when the clutch engagement
speed is reached. This could result in
accidents or personal injury due to loss
of control.
20
Starting the Engine
4
1
Depress the choke lever (1) and set
N
it to
l if the engine is cold
j for warm start – also use this posi-
tion if the engine has been running
but is still cold.
Move the stop switch (2) to F and
N
squeeze the throttle trigger (3) and
N
hold it there.
Press in the starting throttle lock (4)
N
and hold it there.
Let go of the throttle trigger and
N
starting throttle lock. This is the
starting throttle position.
2
3
5
Press the manual fuel pump
N
bulb (5) at least five times.
Cranking
Place the unit on the ground so that
N
it is secure.
Press the machine against the
N
ground with your left hand on the
engine housing.
Pull the starter grip slowly with your
N
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
BT 45