Installing The Mounting Plate - Progress Lighting AirPro P2568 Manual De Instalación

Installing the Mounting
Plate
Step 1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws. (Do
not remove)
Step 2. Place the key holes on the mounting
plate over the 2 screws previously loosened from
the mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 14)
Mounting ring
Mounting plate
Step 3. Rotate up the four padlocks on side of
the mounting plate.
Padlocks
Screws
Figure 14
8.