Worx WG160 Manual Del Usuario página 10

Ocultar thumbs Ver también para WG160:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

sYMBoLs
Warning
Read the manual
Do not expose to rain or water
Do not burn
Always charge the battery pack
between temperatures 40°F
40-105ºF
(4.5°C)-105°F (40.5.°C).
Do not dispose of batteries, return
exhausted batteries to your local
collection or recycling point
BATTERY PACK REMOVAL AND
10
PREPARATION FOR RECYCLING
To preserve natural resources,
please recycle or dispose of
batteries properly. This product
contains lithium-ion batteries.
Local, state or federal laws may
prohibit disposal of lithium-
ion batteries in ordinary trash.
Consult your local waste authority
for information regarding
available recycling and/or
disposal options.
3 in 1 Grass Trimmer/Edger
Edging
Trimming
AssEMBLY
1. aSSEmBly oF THE SaFETy GuaRd
(See Fig. a)
Remove a screw from the Guard; attach the
Safety Guard to the trimmer head. Align the
Guard so it slides into the slots located on the
trimmer head. Turn the tool over and secure
the Safety Guard onto the trimmer head with
the screw (a) provided.
2. aSSEmBly oF THE EdGER/TRimmiNG
SuPPoRT wHEElS (See Fig. B1, B2, B3)
With the tool right side up, slide the Edger/
Trimming Support Wheels (12) assembly onto
the metal plate located on the side of the
Cutting Head (See Fig. B1) or underneath the
Safety Guard (5) (See Fig. B2, B3). Make sure
the grooves of the Edger/Trimming Support
Wheels assembly locks onto the metal plate,
you will hear it click into place.
To remove the wheels assembly, press the
release button (b) on the wheel and pull the
wheels outside.
oPErATIoN INsTrUCTIoNs
waRNiNG! The charger and Battery
Pack are specially designed to work
together so do not attempt to use any other
devices. Never insert or allow foreign metallic
objects into your charger or Battery Pack
connections because of electrical failure and
other hazards that will occur.
1. BEFoRE uSiNG youR CoRdlESS
GRaSS TRimmER
Your Battery Pack is uNCHaRGEd and it
must be fully charged once before it is used.
The battery charger supplied is matched to the
Li-Ion battery for use with this tool. Do not use
another battery charger.
2. CHaRGiNG youR BaTTERy PaCk
The Li-Ion battery is protected against deep
discharging. When the battery is empty,
the trimmer will switch off by means of a
protective circuit: The trimmer head will stop
rotating.
NoTE: In a warm environment or after heavy
use, the Battery Pack may become too hot to
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Wg167

Tabla de contenido