JVC KD-AR3000 Manual De Instrucciones página 38

To show the graphics on the display
—Graphics
You can change the graphics shown on the
display. These graphics appear if no operation is
done for about 20 seconds (except for
"ImageLink").
• All Demo: Display demonstration (animation)
appears (see page 8).
• Int Demo: Display demonstration (animation)
and playback source indication
appears alternately (see page 8).
• UserMovie: Your edited animation appears
(see pages 34 and 35).
• UserSlide: Your edited still images appears
in sequence (see pages 34 and
35).
• UserPict.: One of your edited still image
appears (see pages 34 and 35).
• ImageLink: To show a still image while
playing back an MP3/WMA tracks
(see page 17).
• Off: Cancels all graphic display above.
Note:
You can select "UserMovie," "UserSlide," and
"UserPict." only after downloading the appropriate
files in memory. (See page 30.)
To turn the source animation on the
display on or off—KeyIn CFM
When changing the source, the display shows
the source animation. You can turn on or off the
source animation on the display.
• On: Turns on the source animation.
• Off: Cancels the source animation.
To select the scroll mode—Scroll
You can select the scroll mode for the disc
information (when the entire text cannot be
shown at once).
• Once: Scrolls only once.
• Auto: Repeats the scroll (in 5-second
intervals).
• Off: Cancels scroll mode.
Note:
Even if the scroll mode is set to "Off," you can scroll
the display by pressing D DISP for more than one
second.
38
To adjust the display contrast level
—Contrast
Adjust the display contrast (1 – 10) to make the
display indications clear and legible.
To select the display illumination pattern
—LCD Type
You can select the display illumination patterns
according to your preference.
• Auto: Positive pattern will be selected
during the day time (depending on
the "Dimmer" setting); on the other
hand, negative pattern will be used
during the night time (depending on
the "Dimmer" setting).
• Positive: Positive (normal) pattern of the
display.
• Negative: Negative pattern of the display.
To select the font on the display
—Font Type
You can change the font types used on the
display. Select either "1" or "2" according to your
preference.
To turn the tag display on or off—Tag
An MP3/WMA track can contain track information
called "ID3 Tag" where its album name,
performer, track title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version 1)
and ID3v2 (ID3 Tag version 2). If both ID3v1 and
ID3v2 are recorded on a disc, ID3v2 information
will be shown.
• On: Turns on the ID3 tag display while
playing MP3/WMA tracks.
• If an MP3/WMA track does not
have ID3 tags, folder name and
track name appear.
• Off: Turns off the ID3 tag display while
playing MP3/WMA tracks. (Only
the folder name and track name
can be shown.)