Setting The Clock - JVC KD-AR3000 Manual De Instrucciones

Setting the clock

You can also set the clock system to either
24 hours or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 36 and 37.)
The next-step-operation buttons
start flashing.
2
Press number button 2 to select
"CLOCK"—Clock category of the
PSM settings.
The "Clock Hr" (hour) setting screen
appears on the display.
3
Adjust the hour.
4
Set the minute.
1 Select "Clock Min" (minute).
2 Adjust the minute.
1
5
Set the clock system.
1 Select "24H/12H."
2 Select "24Hours" or "12Hours."
1
6
Finish the setting.
To check the clock time when the unit is
turned off, press D DISP.
The power turns on and the clock time is shown
for about 5 seconds, then the power turns off.
2
2
9