Changing The Display Pattern - JVC KD-AR3000 Manual De Instrucciones

Changing the display pattern

By pressing D DISP, you can change the information shown on the display.
If the information cannot be shown at a time, it will scroll on the display. See also "To
select the scroll mode—Scroll" on page 38.
Some characters or symbols will not be shown (will be blanked or substituted) on the
display.
Each time you press the button, the display patterns change as follows:
While playing an audio CD or a CD Text disc:
Original display
Notes:
• When the disc title/performer is shown, the
(disc) indicator lights up. When the track title is
shown, the (track) indicator lights up.
• If no name is assigned to the audio CD, "NO
NAME" will appear. To assign a name to an audio
CD, see page 43.
• If no disc title/performer or no track title is
recorded for the CD Text, "NO NAME" will appear.
Clock time
Clock
While playing an MP3 or a WMA disc when
"Tag" is set to "Off":
Original display
Current track
number
Notes:
• When the folder name is shown, the
indicator lights up. When the track name is shown,
the (track) indicator lights up.
• If "Tag" is set to "On" (see page 38), ID3 tag
information will appear on the display if the disc
has an ID3 tag.
The album name/performer with
indicator appear on the display instead of the folder
name; while track title with
appear instead of the track name.
Clock time
Track name
Clock
(folder)
(disc)
(track) indicator
23