Selecting The Display Theme - JVC KD-AR3000 Manual De Instrucciones

Selecting the display theme

You can select the theme of the display during
playback.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Select "THEME."
iEQ
Canceled
The last selected theme appears on the
display.
The next-step-operation button starts
flashing.
• For SEL (basic sound) settings,
see pages 24 – 25.
• For iEQ (sound mode) settings,
see pages 25 – 27.
2
Select the display theme you want.
View1
Off
Note:
View 1 and 2 have positive pattern display and
negative pattern display (see right column). Either
positive or negative pattern display is automatically
selected depending on the "LCD Type" setting (see
page 38).
28
Each time you press the
button, the adjustable items
change as follows:
Fad/Bal
Sub Out
Theme Vol Adj
As you turn the control dial,
the themes change as
follows:
View2
Shake Meter
View 1:
A scenery display appears.
• Positive pattern display:
• Negative pattern display:
View 2:
A scenery display appears.
• Positive pattern display:
• Negative pattern display:
Meter:
The left and right audio level meters appear.
• If the small animation display is selected, only
one audio level meter can be shown.
Shake:
The speaker on the display vibrates as input
audio level changes.
Off:
Cancels the display theme.