Installing Shear Blades - Makita XMU04 Manual De Instrucciones

► 1 . Screws
NOTE: The shear blades can be removed without
removing the screws.
5. Remove the crank from the shear blades.
1
► 1 . Crank
NOTE: The crank may remain in the tool.
NOTE: Attach the blade cover and the storage case
to the removed shear blades, and then store the
blades.

Installing shear blades

1. Prepare the crank, undercover, and new shear
blades.
1
► 1 . Crank 2. Undercover 3. Shear blades
1
2
3
12 ENGLISH
2. Attach the blade cover to the shear blades.
3. Adjust the three pins so that they are lined up on
the alignment line.
► 1 . Alignment line
4. Apply a small amount of grease to the periphery of
the crank. Attach the crank to the pins with its small and
large rounds facing down.
► 1 . Crank
5. Slide the shear blades so that the hole on the
base plate is positioned at the center of the rings of
blades.
1
1