Installing Or Removing Shear Blades For Hedge Trimmer; Removing Shear Blades - Makita XMU04 Manual De Instrucciones

9. Make sure that the lock lever fits in the groove on
the undercover.
1
► 1 . Lock lever
CAUTION:
Never use the tool without install-
ing the undercover.
10. Remove the blade cover, and then turn on the tool
to check that it works properly.
NOTICE:
If the shear blades do not operate prop-
erly, the blades are not engaging the crank prop-
erly. Remove the blades and install them again.
Installing or removing shear blades
for hedge trimmer
Optional accessory
CAUTION:
Attach the blade cover before
removing or installing the shear blades.

Removing shear blades

1. Place the tool upside down.
2. While pressing the lock lever, turn the undercover
counterclockwise until
with on the lock lever.
3.
Remove the undercover.
4.
Loosen two screws with a screwdriver and remove
the shear blades.
11 ENGLISH
on the undercover is aligned