Harbor Breeze LP8293LAZ Manual De Usuario página 9

INITIAL ASSEMBLY INSTRUCTIONS
7. Loosen the preassembled hanger ball set screw (GG)
until the hanger ball falls freely down the downrod
(C). Remove the preassembled hanger ball pin (HH)
from the downrod (C) and remove the hanger ball
portion of the downrod (C). Retain the hanger ball pin
(HH) and hanger ball for later.
Hardware Used
Hanger Ball Set
GG
Screw
Hanger Ball Pin
HH
8. Remove the preassembled downrod clip (II) and
downrod pin (JJ) from the bottom of the downrod (C).
Retain these two parts for later.
Hardware Used
Downrod Clip
II
JJ Downrod Pin
9. Route the black and white wires from motor (A)
through the downrod (C).
7
x 1
x 1
8
x 1
x 1
9
9
C
C
II
C
Lowes.com/harborbreeze
HH
GG
JJ