Wiring Instructions - Harbor Breeze LP8293LAZ Manual De Usuario

WIRING INSTRUCTIONS

WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse
box before hanging.
WARNING: If you are not sure if the outlet box is grounded, contact a licensed electrician for
advice, as it must be grounded for safe operation.
1. Connect the green grounding lead from the downrod
(C) and the green grounding lead from the hanger
bracket (B) to the supply grounding conductor
(this may be a bare wire or wire with green colored
insulation). Securely connect the wires with a wire
connector (CC). Connect the white fan motor wire
to the white supply (neutral) wire and secure the
connection with a wire connector (CC). Connect the
black fan motor wire to the black supply wire and
secure the connection with a wire connector (CC).
Hardware Used
CC Wire Connector
2. After connections have been made, turn the leads
upward and carefully push the leads into the outlet
box, with the white and green leads to one side of the
box and the black leads toward the other side.
WARNING: Check to see that all connections are
tight, including the ground wire, and no bare wire is visible
at the wire connectors except for the ground wire. Do not
operate the fan until the blades are in place. Noise and
motor damage could result.
1
CC
x 3
2
13
C
Lowes.com/harborbreeze
CC
B