Fhoton™ Drive Specifications - Franklin Electric FHOTON Drive Manual De Instalación

Fhoton™ Drive Specifications
Absolute maximum input voltages
581011100984-XXXXX
110 VDC, operational limit
NOTE: Suitable for use on a photovoltaic circuit capable of delivering not more than 50 DC amps short circuit current.
Controller Model No.
Output
Output voltage, nominal
Max Amps (RMS)
Output Frequency
Efficiency at Max Power
Absolute Maximum Input Voltage
PV DC
PV source
Input Voltage
Max. Amps Input
Power
Controller Size L x W x D
Millimeters
Inches
Operating Conditions
Temperature Range
Relative Humidity Range
Enclosure Type
* 45 and 115 VDC for the 0.55kW and 1.1 kW models respectively should not be interpreted as an adequate rated PV array output voltage for any installation.
See the PV Solar Array Specifications and System Sizing program for indication of adequate array voltage to provide useful pumping capability.
581013000864-XXXXX
300 VDC, open circuit
0.37 kW model*
581011100984-XXXXX
48 VAC, 3-phase
9.8A, each phase
110 V, Operational Input limit
*40 - 110 VDC
7.2 A DC, continuous
Up to 600 W
Table 7: Fhoton™ Drive Specifications
581014200864-XXXXX
420 VDC, open circuit
0.55 kW model*
581013000864-XXXXX
100 V AC, 3-phase
8.6 A, each phase
20-60 Hz (adjustable)
98%
300 V, open circuit
*45 – 300 V DC
7.2 A DC, continuous
Up to 1200 watts
159.5 x 159.5 x 102.1 mm
6.28" X 6.28" X 4.02"
-25 °C to 50 °C Max.
-13 °F to 122 °F Max.
0 to 100% Condensing
Type 4
1.1 kW model*
581014200864-XXXXX
200 V AC, 3-phase
6.8 A, each phase
420 V, open circuit
*115 – 420 V DC
6.2 A DC, continuous
Up to 2000 watts
23