The Input Setting Menu - Sony VPL-VW10HT Manual De Instrucciones

Input signals and adjustable/setting items
Video or Compo- Pro-
S video (Y/C) nent/
15k RGB sive
Item
CONTRAST
BRIGHT
COLOR
HUE
(NTSC3.58/
4.43 only)
SHARP
RGB –
ENHANCER
D. PICTURE
COLOR
TEMP
COLOR
SYS
DRC-MF
: Adjustable/can be set
– : Not adjustable/can not be set
.........................................................................................................................................................................................................
1) The RGB signals of a computer
Input signal
RGB 1) B&W
gres-
Compo-
nent/
HDTV/
DTV
– –
– –
–
– – –
– –
– – –
– –
The PICTURE CTRL Menu / The INPUT SETTING Menu

The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the
input signal.
Unadjustable items depending on the input signal are
not displayed in the menu.
When the video signal is input
INPUT SETTING
ASPECT: FULL
VIDEO MEMORY: OFF
When the RGB signal is input
INPUT SETTING
DOT PHASE: 50
SIZE H: 50
SHIFT H: 123
SCAN CONV: ON
VIDEO MEMORY: OFF
DOT PHASE
Adjusts the phase of the LCD dots and the computer
signal input from the INPUT A/B connector.
Adjust the picture to where it looks clearest.
SIZE H
Adjusts the horizontal size of the picture input from
the INPUT A/B connector.
The higher the setting, the larger the horizontal size of
the picture. The lower the setting, the smaller the
horizontal size of the picture. Adjust the setting
according to the dots of the input signal. For details on
the suitable value for the preset signals, see page 26
(GB).
VIDEO
VIDEO/60
Signal type
INPUT-A
V: 123
800x600
Signal type
23
(GB)