Cleaning And Maintenance - WMF 0416290011 Instrucciones De Uso

turn the locking screw (6) anti-clockwise.
Note: To ensure the tightness of the glass jug (3), the blade unit (5) must be
screwed on tightly. The blade unit (5) is easier to tighten if you apply a few drops
of cooking oil on the sealing side of the glass jug (see the figure).

Cleaning and maintenance

Remove the mains plug after use. Under no circumstances should you immerse
the drive unit (8) in water. Simply wipe the outside with a damp cloth. Do not
use any abrasive cleaning agents. Ensure that you do not injure yourself on the
sharp blade when cleaning the glass jug (3). Immediately after blending, fill
the jug with warm rinsing water and allow the motor to run for a few seconds.
Then remove the glass jug (3) and clean with a washing-up brush. For thorough
cleaning, you can disassemble the glass jug as described in the section entitled
"Disassembling the glass jug".
For quick and easy cleaning, you can place all loose parts in the dishwasher.
Closing cap (1)
Lid (2)
Glass jug with
base (3)
Sealing ring (4)
Blade unit (5)
Locking screw (6)
Drive unit (7)
14
Can be rinsed
Dishwasher safe
under running
water
Wipe with a
damp cloth