Adjusting The Door Closing Mechanism - deville C07335 Instrucciones Para Instalación Y Empleo

For C07342 (Fig. 26) :
-
. Dismantling of the ventilator support
Slightly unscrew the three screws
and remove the joint support
Remove the 2 fixing screws
blower.
Take the blower out by pulling the grid.
. Reassembling the blower.
Proceed in the reverse order to the
dismantling.
. Electric diagram (Fig. 27)

6.2.1 - Adjusting the door closing mechanism

•
Tighten door closure : (Fig 23)
Alternately loosen screw (1) and tighten screw
-
(2).
Turn each screw 1/4 turn and repeat the
-
operation as required.
NOTE : This operation increases the pressure on
the fireplace door seal.
•
Loosen door closure : (Fig 23)
Alternately loosen screw (2) and tighten screw
-
(1).
Turn each screw 1/4 turn and repeat the
-
operation as required.
NOTE : This operation reduces the pressure on
the fireplace door seal.
.
of the
21