Cooling System Cleaning - Kawasaki FR541V Manual Del Propietário

32 30
MAINTENANCE MAINTENANCE

Cooling System Cleaning

Before each use, check that the air inlet (rotary)
screen (inside A) is free from grass and debris and
clean if necessary. Every 100 hours of operation,
check and clean the cooling fins and inside of en-
gine shrouds to remove grass, chaff or dirt clogging
the cooling system and causing overheating. When
cleaning, remove the air cleaner (inside E) and the
fuel pump (B), loosen the bolts (C), (D), and then,
remove the fan housing (F).
NOTICE
Do not run engine before all cooling system
parts are reinstalled to keep cooling and car-
buretion as intended.
[Bolts Size, Tightening Torque]
Bolts Size Length Tightening Torque
C M6 16 mm 8.8 N·m (0.9 kgf·m, 78 in·lb)
D M6 22 mm 8.8 N·m (0.9 kgf·m, 78 in·lb)
A. Air Inlet Guard
B. Fuel Pump
C. D. Bolt
E. Air Cleaner Cover