Garland BEST 100 DPE Manual De Instrucciones página 36

English
9. TROUBLESHOOTING
Depending on the symptons that you observe, you can probably know the cause of the problem and could even
solve it:
Problem
Engine does not work
Abnormal noises
Abnormal vibrations
In any other case, take the machine to your nearest after sales service.
Cause
The machine is not connected
Damaged cable
Switch damaged
Brushes worn out
Bloqued cutting tool
Loose cutting tool
Blades worn out or damaged
Internal engine or transmission
problem
36/120
Action
Plug the machine to the mains
Take the machine to the service dealer.
Never try and repair a cable with tape
Take the machine to the service dealer
Take the machine to the service dealer
Unplug the machine, wait for cutting tool
to stop and remove elements blocking the
cutting tool
Check and tighten the cutting element. If
the noise persists take your machine to the
after sales service dealer.
Substitute the blades
Take the machine to the service dealer