Resumen de contenidos para Canon PIXMA MX360 Serie
Página 1
ENGLISH ESPAÑOL Canon Inkjet Office All-In-One Equipo multifunción para oficina Canon Inkjet series Getting Started Read Me First Guía de inicio Léame en primer lugar Make sure to read this manual before using the machine. Please keep it in hand for future reference.
Página 2
On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. Some parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 22. Los manuales en pantalla se pueden ver en un ordenador.
Página 3
■ Contents ■ Symbols Used in This ■ Contenido ■ Símbolos utilizados en este Document documento 1 Preparation P.2 Prohibited actions. 1 Preparación P.2 Acciones prohibidas. 2 Install the FINE Cartridges P.8 2 Instalación de los cartuchos FINE (FINE Cartridges) P.8 3 Load Paper P.12 Instructions including important Instrucciones que incluyen...
Página 4
Make sure all the following items 5. Setup CD-ROM (containing the • Do not install the machine where an object may fall on it. In drivers, applications and on-screen are supplied. addition, do not place any object on the top of the machine. It may manuals) fall into the machine when opening covers, resulting in malfunction.
Página 5
Do not connect the power cord yet. Remove all the protective materials 1. Open the Paper Output Tray (A). and orange tape from the outside of the 2. Make sure the Document Cover (B) is closed, then lift to open the Scanning Unit (Cover) (C). machine.
Página 6
Remove both the orange tape (E) and the protective material (F) 1. Lift the Scanning Unit (Cover) slightly. carefully. 2. Fold the Scanning Unit Support. 3. Close the Scanning Unit (Cover) gently. Retire la cinta naranja (E) y el material protector(F) con cuidado. 1.
Página 7
Only when connecting a telephone or an answering machine Sólo al conectar un teléfono o un contestador automático Connect one end of supplied telephone line cable (G) to Use fax features? Remove the Cap (I) (1), then connect a telephone or an answering the lower connector labeled “L”...
Página 8
Insert the power cord into the connector on the left Press the ON button (J) to turn on the Use the [ or ] button (K) on the Operation Panel to select side of the machine and into the wall outlet firmly. machine.
Página 9
When this screen is displayed, proceed to the next step. Cuando aparezca esta pantalla, continúe con el paso siguiente. When it is necessary to turn off the machine Cuando sea necesario desconectar el equipo Be sure to follow the procedure below. •...
Página 10
1. Make sure the Document Cover (A) is closed, then lift to open the Scanning The FINE Cartridge Follow the next Unit (Cover) (D). Holder (H) moves to the procedure to insert the installation position. Black and Color 2. Fix it with the Scanning Unit Support (E). FINE Cartridges into their If the FINE Cartridge Holder •...
Página 11
Open the Ink Cartridge Locking Cover on the right side. After removing the Black FINE Cartridge from its box, pull the orange protective tape (J) in the direction of the arrow and remove it carefully. Pinch (I) firmly and pull up the cover. •...
Página 12
Place the Black FINE Cartridge into the right slot Push down of the Ink Cartridge Locking Cover until it snaps into place. View the Ink Cartridge Locking Cover straight on and check that it is locked correctly (not at an angle). •...
Página 13
Insert the Color FINE 1. Lift the Scanning Unit (Cover) slightly. Wait for about 1 minute until the LCD changes as shown in the illustration, then Cartridge into the left proceed to the next step. 2. Fold the Scanning Unit Support. FINE Cartridge Holder 3.
Página 14
Open the Paper Support Move the Paper Guides Load paper in the center Slide the left and right Paper Guides against both (A). (B) to both edges. of the Rear Tray (C). edges of the paper. Load paper in portrait Make sure that the height of the paper stack does not exceed the orientation with the printing line (D).
Página 15
Depending on your needs, select one of the following three modes for receiving Read this section only when using faxes. You can change the receive mode after installation is complete. For details, the fax features. refer to “Setting the Receive Mode” in the on-screen manual:Basic Guide. If not using the fax features, go to En función de sus necesidades, seleccione uno de estos tres modos para la “5 Install the Software”...
Página 16
Responses to Calls in Each Mode Respuestas a llamadas en cada modo When a fax call arrives When a voice call arrives Si recibe una llamada de fax Si recibe una llamada de voz While the telephone's ringtone While the telephone's ringtone sounds, pick up the handset.
Página 17
Press the FAX button (A), then press Use the [ or ] button (C) to select Receive mode Select a receive mode, then press the OK button. the Menu button (B). set., then press the OK button. If the advanced settings screen is displayed Select No, then press the OK button.
Página 18
Do not connect the USB cable yet. For Spanish Users in the U.S.A. Para los usuarios de habla hispana en EE. UU. Aún no conecte el cable USB. To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.
Página 19
Easy-WebPrint EX Easy-WebPrint EX If the USB cable is connected before the software is installed Si el cable USB está conectado antes de instalar el software Press the ON button (A) to TURN OFF THE MACHINE. Operating noise may continue for up to 30 seconds until the machine turns off.
Página 20
Windows 7/Windows Vista Click Run Msetup4.exe on the Windows XP AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. Haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe) en la pantalla Reproducción automática (AutoPlay) y, a continuación, haga clic en Sí...
Página 21
Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed. Follow any on-screen instructions to proceed with the software installation. • If you want to select particular items to install, click Custom Install. Haga clic en Instalación simple (Easy Install). Haga clic en Instalar (Install).
Página 22
USB Port If the serial number is not displayed on the registration If the Extended Survey Program screen, input the number found inside the machine. screen appears Puerto USB Si el número de serie no aparece en la pantalla de Si aparece la pantalla Extended registro, introduzca el que viene en el interior del equipo.
Página 23
, then select using the Operation Panel on the machine for the first XPS Printer Driver in the Custom Install screen. Solution Menu EX starts when clicking OK in the Canon Solution time. For details on useful functions of the XPS Printer Menu EX dialog.
Página 24
Various application software are installed on the computer along with the drivers. You can print creative items by correcting/enhancing photos using the application software. For details on how to use the application software and the machine, refer to the on-screen manual. Junto con los controladores, en el ordenador se instala diverso software de aplicación.
Página 25
Load paper in the Rear Tray (A) in portrait orientation with Start Solution Menu EX from the Canon Solution the printing side facing up. Menu EX icon on the desktop (Windows) or on the Dock (Macintosh), click Photo Print, then click Photo Make sure that the Paper Output Tray (B) is open.
Página 26
Click Select Paper, then select the Click Layout/Print, then select a layout Click Print. Select a folder containing images, then select an image you want to print. Paper Size and Media Type settings for the image. If you are using Windows, printing will start. that match the loaded paper.
Página 27
Load A4 or Letter-sized Open the Document Cover (B), then place 1. Close the Document Cover. plain paper. the document face-down and align it with the 2. Press the COPY button (E). Alignment Mark (C). Make sure that the Paper The copy standby screen is displayed.
Página 28
Press the FAX button (A). Open the Document Tray (C), then move the Document Guides (D) to both edges. This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (B). • For details on supported documents and settings for image quality, density (brightness), etc., refer to the on-screen manual: Basic Guide.
Página 29
Insert the document until a beep sounds, then slide the left and right Document Use the Numeric buttons (E) to enter Press the Black button (F). Guides against both ends of the document. the fax number. The fax is sent. •...
Página 30
After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a facial tissue or the like as required.
Página 31
(Based on ITU-T No.1 chart for US specifications and Canon FAX Humidity: 10 to 90 % RH (no condensation) 1 GHz processor G4 (867 MHz or faster) Standard chart No.1 for others, both in standard mode or Canon FAX 512 MB 512 MB Standard chart No.1, standard mode.)
Página 32
El espacio disponible en el disco duro *2 No se puede modificar el tiempo para que el equipo entre en espera. el cuadro nº 1 del estándar de FAX de Canon para el resto, ambos en puede cambiar sin aviso.
Página 33
CL-211 2976B001 CL-211 2976B001 Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon Llame a 1-800-OK-CANON para localizar un distribuidor cercano o visite online store at www.shop.usa.canon.com la tienda en línea Canon en www.shop.usa.canon.com CANON U.S.A. INC.