Safety Precautions - OHAUS Valor 2000W Serie Manual De Instrucciones

Valor™ 2000W Series
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the
Valor™ 2000W Series. Please read the manual completely before using the scale.

1.1 Safety Precautions

Please follow these safety precautions:
• Verify that the AC Adapter input voltage matches the local AC power supply.
• Do not drop loads on the platform.
• Do not place the scale upside down on the platform.
• Disconnect the scale from power supply when cleaning.
• Operate the scale only under ambient conditions specified in these
instructions.
• Service should be performed only by authorized personnel.
• Only use weights within the scale's capacity as specified in these instructions.
• Do not operate the scale in hostile environments.
• Do not carry the scale by the pan or sub-platform. Use the handholds on the
side of the scale housing.
2. INSTALLATION
2.1 Package Contents
• Scale
• Stainless Steel Pan
2.2 Installing Components
Place the stainless steel pan onto the weighing platform before turning the scale on.
Figure 2-1. Install the stainless steel pan onto the weighing platform
• Power Adapter & Plug
• Instruction Manual
EN-1
• Warranty Card