Introduction; Definition Of Signal Warnings And Symbols; Safety Precautions - OHAUS Aviator 3000 Serie Manual De Instrucciones

Aviator 3000 Series
1.

INTRODUCTION

This manual contains installation, operation and maintenance instructions for the
Aviator 3000 Series scale. Please read the manual completely before installation
and operation.

1.1 Definition of Signal Warnings and Symbols

Safety notes are marked with signal words and warning symbols. These show
safety issues and warnings. Ignoring the safety notes may lead to personal injury,
damage to the instrument, malfunctions and false results.
Signal Words
CAUTION
Attention
Note
Warning Symbols
General Hazard
Alternating Current

1.2 Safety Precautions

CAUTION: Read all safety warnings before installing, making
connections, or servicing this equipment. Failure to comply with
these warnings could result in personal injury and/or property
damage. Retain all instructions for future reference.

Verify that the AC Adapter's input voltage range and plug type match
the local AC power to be used.

Do not position the scale such that it is difficult to disconnect the
power cord from the power receptacle.

Make sure that the power cord does not pose an obstacle or tripping
hazard.

Operate the equipment only under ambient conditions specified in
these instructions.

Do not operate the equipment in hazardous or unstable
environments.

This scale is for indoor use only.

Use the scale in dry locations only.

Do not drop loads on the pan.

Use only approved accessories and peripherals.

Disconnect the equipment from the power supply when cleaning.

Service should only be performed by authorized personnel.
For a hazardous situation with low risk, resulting in damage to
the device or the property or in loss of data, or injuries if not
avoided.
For important information about the product
For useful information about the product
Electrical Shock Hazard
Direct current
EN-3