Wheel Removal; Wheel Installation - Yamaha Big Bear PROFESSIONAL Manual Del Propietário

1. Arrow mark
1. Flèche
1. Marca en forma de flecha

Wheel removal

1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.

Wheel installation

1. Install the wheel and the nuts.
NOTE:
_
G Tapered nuts are used for both the front and
rear wheels. Install the nut with its tapered
side towards the wheel.
G The arrow mark
ward the rotating direction of the wheel.
_
8-81
EBU01112
EBU01121
on the tire must point to-