Description Of Display Symbols - HealthSmart 04–695–001 Manual De Instrucciones

DESCRIPTION OF DISPLAY SYMBOLS

SYS
Indicates a measurement
within Stage 3 Hypertension.
DIA
SYS
Indicates a measurement
within Stage 2 Hypertension.
DIA
SYS
Indicates a measurement
within Stage 1 Hypertension.
DIA
Appears when batteries should be
replaced.
Shows the pulse rate per minute.
Occurs when an error was made
during measurement.
Appears when there is an irregular
heartbeat detected during
measurement.
Appears when the cuff is unstable or
it has too much air left in it. Once the
arrow stops flashing, the unit is ready
to take a measurement.
Appears when the unit is ready or
a measurement error has occurred.
Restart the measurement if an
error occurs.
Appears when recalling a
measurement from memory.
18