Voice Language Setting - HealthSmart 04–695–001 Manual De Instrucciones

VOICE LANGUAGE SETTING

To set the desired voice language:
1. When the unit is off, you can select the desired voice language by pressing and holding
the MEMORY button.
2. Now the screen will cycle through L0, L1 and L2 as shown in Fig. 1.
L0 - voice function is off
L1 - voice is in English
L2 - voice is in Spanish
The monitor will say the corresponding language with the displayed language code.
3. Once the desired language has been selected, release the MEMORY button.
4. After the desired language has been selected, you can adjust the volume by pressing
and holding down the MEMORY button until the bars on the side of the screen begin
to increase Fig. 2.
5. Continue to hold the MEMORY button down until the volume reaches the desired level, then
release the MEMORY button to set.
6. The unit will automatically turn off after the desired volume level has been set.
Fig. 1
14
Fig. 2