SOUNDMASTER UR2045 Manual De Instrucciones página 13

Setup for advance activation for max. 24 hours.
1. Press the "Timer/Sleep" button once.
2. Press the "Menu" button to enter into the advance timer setup mode.
3. To adjust the timer is the same as in easy activation.
During playing, press and hold the "Timer/Sleep" button. The device will activate the sleep timer
and the display show "SLEEP 30". Press the "
OFF and press "Enter" to confirm. If you select OFF, the sleep time is deactivated.
Press the "Light" button once, the lamp will lightning. Press the button again to switch off the
lamp. To save energy, the lamp will automatically switch off after 120 minutes.
Press in standby mode the "Menu" button to enter into the setup mode and the "
button to select the following settings. Press "Enter" to confirm the selection. To leave the setup
menu, press the "Menu" button or wait for about 10 seconds.
1. Set EQ (Equalizer)
The unit has 6 preset equalizer settings and one custom setting.
1. When you have entered the EQ setting, press the "
the preset EQ (FLAT, ROCK, CLASSIC, JAZZ, POP, BASS) or the custom setting
(CUSTOM) and "Enter" to confirm the selection.
2. If you have chosen the "CUSTOM" setting, now you can select the setting for "BASS" or
"TREBLE" with the "
setting, press the "
2. Set the clock and date
1. When "TIME SET" is shown in the display, press the "Enter" button to enter the clock,
date, update and format settings.
2. Press the "
and press "Enter" to confirm.
CLOCK: Adjust the flashing digits (hour, minute) with the "
confirm each with the "Enter" button.
SET DATE: Adjust the flashing digits (day, month, year) with the "
and confirm each with the "Enter" button.
UPDATE: If "F RADIO" is shown in the display, the device will automatically update the
clock from DAB or FM mode (When RDS is available!). If "NOUPDATE" is shown, the
device will running without automatically update. Select with the "
confirm with the "Enter" button.
12/24H: Set the clock display in "12" or "24" hour format. Select with the "
button the format and confirm with the "Enter" button.
3. Set SDA timer
SDA means "Special Date Alert". It´s provide to remember favorite days. There are 10 days
for input (SDA 0-9)
1. Select "SET SDA" with "
2. Select the SDA timer 0-9 and press "Enter" to confirm. The display show "31.12.2018"
and the first two digits are flashing.
3. Press the "
the "Enter" button.
SLEEP TIMER
ACTIVATE LED LAMP
" or " " button and press "Enter" to confirm. To adjust the
" or " " button and confirm with "Enter".
" or " " button to select "CLOCK", "SET DATE", "UPDATE" or "12/24H"
" or "
" or " " button to adjust each input (Date/month/year) and confirm with
" or " " button to select 15, 30, 45, 60, 90 or
SETUP
" or "
" and press "Enter" to confirm".
4
UR2045 / English Instruction Manual
" or "
" button to select one of
" or " " button and
" or "
" or " " button and
" or "
"
" button
"