Hour Meter; Product Liability; Safety; Safety Definitions - Husqvarna TS 354XD Manual De Usuario

The hot surfaces symbol show a risk,
which, if not obeyed, can cause death,
serious injury and/or damage.
The fire symbol shows a risk, which, if
not obeyed, can cause death, serious
injury and/or damage.
Freewheel (automatic models only).
Label on the product

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
risk of injury or death for the operator
or bystanders if the instructions in the
manual are not obeyed.
1940 - 006 - 13.09.2022
Cruise control.

Safety

Used if there is a
DANGER – Keep hands and feet away.

Hour meter

The hour meter shows how many hours the engine
has been in operation. Refer to
page 3 for the position of the hour meter.
To manually reset the hour meter, turn the ignition
key to the on position and then to the "STOP"
position 5 times.
Note:
The hour meter only stops when the ignition
key is in the "STOP" position. Make sure that the
ignition key stays in the "STOP" position when the
engine has stopped.

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not
from the manufacturer or not approved by the
manufacturer.
• the product is not repaired at an approved
service center or by an approved authority.
Euro V Emissions
WARNING:
engine voids the EU type-approval of
this product.
CAUTION:
damage to the product, other materials
or the adjacent area if the instructions in
the manual are not obeyed.
Note:
Used to give more information that is
necessary in a given situation.
Product overview on
Tampering with the
Used if there is a risk of
5