Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1.
Sanding pad
2.
Switch
3.
Adaptor
4.
Clamp
5.
Dust extraction add-on
6.
Fixing screw with washer
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1.
Various working tips
2.
Sanding paper (80#)
3.
Dust extraction add-on with adaptor + clamp
4.
Hexagonal key
5.
Transport case
SELECTION OF WORKING TOOL
Below table presents examples of use for various working tools.
Name
HSS blade for metal
Half-round HCS wheel
for wood
HCS blade for wood
Half-round wheel with
tungsten coat
- 6 pcs
- 5 pcs
- 1 set
- 1 pce
- 1 pce
PREPARATION FOR OPERATION
Type of material
Metal (e.g. nails, bolts,
small
sections),
non-
ferrous metals
Wood,
wood-based
materials, plastics
Wood,
wood-based
materials, plastics
Cement
joints,
soft
ceramic tiles, hard plastics
and other materials
12
Intended use
Small dividing and plunge
cutting
Dividing and plunge cutting
in corners
and
hardly
accessible
places, near surface
Dividing and plunge cutting
in corners
and
hardly
accessible
places, near surface
Cutting short and cutting
off close to edges, in corners
and hardly accessible places
Example
Cutting narrow sections
short, cutting joining
elements, e.g. clamps
Narrow plunge cuts in
solid wood, e.g. for air
grates
Cut outs in furniture
boards,
cutting
cove
bases
short,
plunge
cutting for fitting floor
panels
Removal of joint, cutting
holes in ceramic tiles
and plastics
Publicidad
