Detaching And Attaching The Front Panel; Resetting The Unit - Sony MEX-N5200BT Manual De Instrucciones

Mounting the unit in the
dashboard
• Before installing, make sure the catches on
both sides of the bracket  are bent
inwards 2 mm ( 3 /
32
• For Japanese cars, see "Mounting the unit
in a Japanese car" (page 39).
1
Position the bracket  inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2

2
Mount the unit onto the bracket ,
then attach the protection collar .

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
in).
182 mm (7 1 / in)
4
1 / in)
8
Catch



Mounting the unit in a Japanese car
You may not be able to install this unit in
some makes of Japanese cars. In such a
case, consult your Sony dealer.
TOYOTA

to dashboard/center console
Bracket
Existing parts supplied
with your car
NISSAN

to dashboard/center console
Bracket
Existing parts supplied
with your car
Note
To prevent malfunction, install only with the
supplied screws .
Detaching and attaching the front
panel
For details, see "Detaching the Front Panel"
(page 7).

Resetting the unit

For details, see "Resetting the Unit" (page 7).
Bracket

Bracket

39
GB