Electrical Safety - Jacuzzi SKYLOUNGE Manual De Instrucciones

You must comply with this last regulation. Any other proce-
dure is prohibited.

Electrical safety

The Jacuzzi® hot tubs are safe appliances, manufactured ac-
cording to EN 60335-2-60, EN 61000-3-2, EN 61000-3-3, EN
55014-1, EN 55014-2 standards and tested during production
to guarantee user safety.
■ Installation must be carried out by qualified personnel who
are authorised to install the product, in compliance with the na-
tional regulations in force.
m
It is the installer's responsibility to select the mate-
rials according to use, carry out the installation cor-
rectly, and verify the condition of the network to
which the appliance will be connected, as well as its
suitability in ensuring usage safety during mainte-
nance and inspection operations.
■ The Jacuzzi® hot tubs are class "1" appliances. This means that
they must be connected to the electrical mains and earthing
system permanently, without any intermediary junctions.
m
The building's electrical system must be equipped
with a 0.03 A residual current device and an efficient
earthing circuit.
Make sure that the residual current device is in good
working order by pressing the TEST button, which
must trip.
m
Parts incorporating electrical components, with the
exception of remote-control devices, must be posi-
tioned or fixed so that they cannot fall into the tub.
Live components and equipment must not be within
the reach of individuals in the hot tub.

Where the building's electrical system is not able to
guarantee a constant power supply, we recommend
installing a voltage regulator, suitably sized for the
power of the appliance, before installing the appli-
ance itself.
■ When connecting to the mains, we advise installing a multi-
pole circuit breaker, which completely disconnects the appliance
in the event of a category III overvoltage; these devices must be
positioned in an area that complies with the safety regulations.
■ The installation of electrical devices and equipment (sock-
ets, switches, etc.) near the hot tub must comply with the legal
standards and regulations in the country where the hot tub is
installed.
■ For the equipotential connection prescribed by the specific
national standards, the installer must use the terminal provided
(as per standard EN 60335.2.60
)
0
( 3, part. E2), identified
with the symbol. In particular, ensure that all the metal masses
surrounding the hot tub, such as water pipes, gas pipes, metal
boards around the edge, etc., are equipotential.
■ The equipment is fitted with an LED lighting system
compliant with the standard EN 62471.
m CAUTION! Before carrying out any maintenance, discon-
nect the appliance from the electrical power supply.
11