General Specifications; Environmental Conditions - Megger DCM1500 Guia Del Usuario

Specifications

General Specifications

LCD display digits:
Display count:
Measuring rate:
Overrange display:
Automatic power off time:
Low battery indicator:
Power requirement: 9 V PP3 / 6LR61 battery.
Battery life:

Environmental Conditions

Indoor Use.
Calibration:
Operating temperature :
Storage temperature:
Measurement Category:
Application around and removal from UNINSULATED HAZARDOUS LIVE
conductors permitted. Personal protection must always be observed.
Operating altitude:
Conductor Size:
Pollution degree:
EMC:
Shock vibration:
3 ¾ digit large scale LCD readout.
4000 counts.
1.5 times / sec.
"OL" is displayed for "Ω" functions, shows
the real value for "A" and "V" function.
Approximately 30 minutes after power on.
is displayed. Replace the battery
when the indicator
the display.
Rechargeable batteries are not recommended
for use with this instrument.
100 hours.
One year calibration period is recommended
0°C ~ 30°C (≤ 80 % RH)
30°C ~ 40°C (≤ 75 % RH)
40°C ~ 50°C (≤45 % RH)
-20 to +60°C, 0 to 80% RH
(batteries not fitted).
(acc. to CAT IV 600 V)
2000m (6562 ft)
51mm diameter.
2
EN 61326-1
Sinusoidal vibration per MIL-T- 28800E
(5 ~ 55 Hz, 3g maximum).
appears in
9