Polarized Plug Instructions; Short Cord Instructions; Before The First Use - Kalorik MAXX FT 47821 BKSS Manual Del Usuario

POLARIZED PLUG INSTRUCTIONS

This appliance is equipped with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will fit into the
polarized outlet only one way. If the plug does not properly fit into the
outlet at first, reverse it. If it still does not fit, contact a competent qualified
electrician. Do not attempt to modify the plug in any way.

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in or tripping over a longer cord. Extension
cords may be used if care is exercised in their use.
• The electrical rating of the extension cord should be at least that of
the appliance. If the electrical rating of the extension cord is too
low, it could overheat and burn.
•
The resulting extended cord should be arranged so that it will not
drape over the countertop or tabletop where it can be pulled on by
children or tripped over.

BEFORE THE FIRST USE

• Unpack the appliance. Wash the basket and trivet in hot, soapy
water and then wipe them dry. Wipe the interior of the frying cavity
with a damp cloth or sponge, and then dry with a paper towel.
Make sure the cavity is dry before operating the unit.
• Position the MAXX Air Fryer on a flat, level and heat-resistant
surface. Make sure that it is also positioned at least 6 inches (15 cm)
away from any surrounding objects.
• It is recommended to let the MAXX Air Fryer heat for about 20
minutes without any food in it. This helps to eliminate grease that
may have adhered during manufacturing, and to eliminate the
"new" appliance smell.
• Ventilate the room during this period. When your Air Fryer is heated
for the first time, it may emit slight smoke or odor. This is normal with
many heating appliances.
www.KALORIK.com
7
MAXX Air Fryer – 200605