OHAUS Scout Manual De Instrucciones página 4

Ocultar thumbs Ver también para Scout:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
EN-2
SETUP DEFINITIONS
Menu Settings
PRINT / A. Print – Off
PRINT / A.Print / On.Stable – Load,
Load.Zero
PRINT / A.Print / interval - (xx) sec
PRINT / Auto Print – accept
PRINT / A.Print – Continuous
PRINT / Content
PRINT / Layout / Format - (Single,
Multi)
PRINT / Layout / Feed - (Line, 4
Lines, Form)
USB.HST / E.Menu
USB.HST / E.App
USB.HST / I.Menu
USB.HST / I.App
Notes:
The exported data will be saved in one file accumulatively.
The weight value will be saved to USB flash drive when pressing the Print button.
The saved file name will be"SCT_DATA.txt". The format is following the PRINT
menu setting. Each saving will be started with "--------------" on the top line.
For STX Balances:
Upon installation, the STX balance will show USB icon (
corner.
Menu added
Communication
|--USB Host
|--Save to USB
|--Print Settings
Explanation
Only sends data when PRINT is pressed.
Balance only transmits stable data.
Load: Print stable value excluding zero
Load.Zero: Print stable value including zero
Balance sends data every (xx) seconds.
Balance only sends stable accept data in Check
mode.
Balance repeatedly sends data as fast as
possible.
On: print relevant content after weighing data
Gross – on: G; Net – on: N; Tare – on: T;
Info – on: balance will print application mode
setting parameters
Single: print all data in one line
Multi: print all data in multiple lines
Line: feed one line after printing
4 Lines: feed four lines after printing
Form: feed one page after printing (move to the
top of next page after printing)
Exports menu settings to USB flash drive, saved
file name: "SCT_MENU.txt".
Exports application mode settings to USB flash
drive, saved file name: "SCT_APP.txt".
Imports menu settings from USB flash drive
Imports application mode settings from USB
flash drive
Function
The value can be On or Off
On: "Save to USB" button is active.
Off: "Save to USB" button is inactive.
For more info, please refer to the STX instruction manual.
USB Host Interface
) in the upper right

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

30268983

Tabla de contenido