Forch 5424 27 2 Manual Del Usuario página 7

Battery-powered LED Hand Torch
ENG
12 V / 24 V Car Charging Device
Please read the operating instructions of the car charging device before initial commissioning.
The car charging device serves the purpose of charging or operating the FÖRCH battery-
powered LED hand torch 27 W, Art. No. 5424 27.
Technical details:
Input: 12 V / 24 V, Output: 9 V – 2,000 mA
For your safety:
Since the manufacturer has no direct influence on the installation of the car charging
■
device, the warranty only covers the charging device itself. Only use the charging device
for the purposes described in the instruction manual.
Do not make any modifications to the charging device and protect it against moisture.
■
The manufacturer accepts no liability for personal injury or property damage resulting
■
from improper installation, operation or maintenance.
Do NOT use the charging device if the cable, plug or housing are damaged.
■
Keep the charging device away from children.
■
Non-observance of these safety instructions can lead to property damage and/or
personal injury! The user is liable for damage caused by improper use.
Operation / charging process:
1. Connect the output of the charging device with your battery-powered LED hand torch
using the connector.
2. Insert the input of the car charging device to a 12 V / 24 V DC car socket.
3. If the connection and power supply are correct, the indicator LED on the charging device
will light up red continuously. The battery-powered LED hand torch is charging.
4. Note: For some car manufacturers, the vehicle ignition must be switched on in order for
the 12 V / 24 V voltage to be supplied.
Disposal:
The charging device may not be disposed of in normal household waste.
The device must be disposed of via the respective public recycling system
(a municipal disposal facility / an approved waste disposal facility).