Philips AVENT SCF393/62 Manual De Instrucciones página 14

English
14
1. Place all parts on the
top rack of the
dishwasher.
Step 3: Disinfecting
Supplies needed:
- A household pot
- Drinking-quality water
Caution: During disinfection with boiling water, prevent the bottle or other parts from
touching the side of the pot. This can cause irreversible product deformation or damage
that Philips cannot be held liable for.
5 min.
1. Fill a household pot
with enough water to
cover all parts and
place all parts in the
pot. Let the water boil
for 5 minutes. Make
sure the parts do not
touch the side of the
pot.
2. Put dishwashing
liquid or a tablet in the
machine. Run a
standard program using
hot water and a heated
drying cycle (or
sanitizing setting).
2. Allow the water to
cool down.
3. Remove the parts
from dishwasher with
clean hands. If items
are not completely dry,
place items on a clean,
unused tea towel or
paper towel to air-dry
thoroughly before
storing. Do not use a
tea towel to rub or pat
the items dry.
3. Gently remove the
parts from the water.
Place the parts on a
clean surface/tea towel
or drying rack to air-dry.
4. Store the dry items
safely until needed.
Ensure the clean pump
parts, bottle brushes
and wash bowls have
air-dried thoroughly
before storing. Items
must be completely dry
to help prevent germs
and mold from growing.
Store the dry items in a
clean, protected area.