Philips AVENT SCF393/62 Manual De Instrucciones página 16

English
16
5. Place the silicone
diaphragm in the pump
body.
9. Insert the adapter
into the power outlet
and insert the small
plug at the other end
into the motor unit.
Motor unit part description
1 3
2 4
8
7
6. Make sure that the
silicone diaphragm fits
securely around the rim
by pressing it down
with your thumbs.
10. The breast pump is
now ready for use.
1 USB power inlet
5
2 On/off button with
6
pause/play function
3 Mode selection button
4 'Level down' button
5 'Level up' button
6 Indicator lights for modes
and levels
7 Tubing port for single
breast pump
8 Tubing ports for double
breast pump
7. Attach the silicone
tube and cap onto the
diaphragm. Push down
the cap until it is
securely in place.
Note: You can place
the cover over the
flange to keep the
breast pump clean
when you take it with
you and while you
prepare for expressing.
8. Connect the tube(s)
to the motor unit.