Use - Glatz SUNWING Casa Manual De Instrucciones

Use

Bracket
Crank
Mast
Parasol base (optional)
1.3
1
1.4
1.5
Struts Cover
Slide
Opening the parasol
1. Remove protective cover
2. Detach strap / belt
3. Extend bracket to the opening stop
4. Completely open the parasol
through use of the crack
5. Make sure that the inner parts are
engaging
!
The parasol will be automatically
aligned horizontally. For safe operation,
the inner parts must be completely
engaged.
28 29
360°
4.1
4.2
5.1
5.2
2
Positioning of the canopy inclination
1. Turn the crank until the desired
inclination is reached
3
Turning the parasol
1. Open the fixing lever at the base
tube clamp
2. Turn the sunshade to the
requested position
3. Tighten the fixing lever again
4
Closing the parasol
To close the sunshade, the canopy
needs to be in a horizontal position.
1. Set sunshade horizontally
2. Turn the hand crank until the
sunshade is closed
4.4
3. Push in the unlock button
4. Pull the bracket back
5
Bind/protect the parasol
1. Pull out / wrap fabric segments
2. Secure the parasol with a
binding strap / belt
3. Lift the protective cover above the
parasol section
5.3
4. Close the protective cover
!
Position the rod on the side of the
parasol.