Use - Glatz FORTINO Riviera Instrucciones De Montaje Y Uso

Assembly and commissioning
1
2
3
3.1
3.2
4
FORTINO
Riviera
FORTERO
* maximum wind speed FORTELLO
when it is securely
anchored in the ground.
Unpack the shade
Supplied with:
- shade, bottom pole, tie-rope, top, top disc
- operating instructions
!
Dispose of packaging materials properly
and keep away from children. Do not
install defective material. In case of
damage, please inform the transport
service provider immediately.
Placing the parasol down
!
Carefully place the parasol on a clean,
horizontal surface. The parasol is very
heavy. Work in a threesome and hold the
parasol securely.
Assembly
1. At the top end of the pole, first put top
disc in place and then screw top on.
2. Insert bottom pole into top pole and tight-
en screws.
!
Ensure that the connection of the
lower and upper pole is secure.
Prepare ground fastening
Place the ground sleeve according to the
separate instructions.
minimum
weight
Size
[cm] [kg]
ø250 55
ø300, 240 x 240 70
200 x 200 55
ø350, 350 x 250 90
300 x 200 70
300 x 300 90
250 x 250 70
350 x 350 120
350 x 350, 400 x 300, ø400 120
300 x 300 120
400 x 400 180
22 23

Use

Instruction manual
maximum
wind speed*
[km/h (Bft.)]
80 (9)
60 (7)
70 (8)
55 (7)
60 (7)
60 (7)
70 (8)
50 (7)
85 (9)
100 (10)
75 (9)
5
Setting up the shade
Fix shade in the base.
Supporting struts
Slider
Clamping lever
1
Open sunshade
1. Remove any protective cover
2. Release binding belt
3. Open parasol with the help of the slide
4. Pull down the tensioning lever and
hook it in place
5. Lock the tensioning lever in the down
position
!
Make sure that the clamping lever is
closed
2
Close shade
1. Release clamping lever, close shade.
2. Pull out / wrap fabric segments
3. Apply binding belt
4. Apply protective cover if necessary
!
Only wrap / pack completely dry
parasols.