Suntec Wellness Klimatronic MOVE plus Manual De Instrucciones página 16

Tabla de contenido

Publicidad

Possible installation errors
• Make sure that the outlet is not blocked to prevent damage to the unit.
• The exhaust hose should not be bent (Fig. 4).
Control panel
⑨ ⑩
1
Power
2
Mode
3
Sleep mode
4
Temperature -
5
Temperature +
6
Timer
7
Fan
8
Remote control receiver
9
Water tank indicator
10 Compressor indicator
1. POWER: Press the button to turn the unit on or off. The unit automatically starts in cooling mode with low fan
speed.
2. MODE: Press the Mode button after starting the unit to select between cooling, dehumidifying or fan mode.
3. FAN: Press the Fan button after starting the unit and adjust the desired fan speed.
4. TEMPERATURE - / TEMPERATURE +: Switch the unit into the cooling mode and use these buttons to adjust
desired room temperature (16-31° C).
5. SLEEP MODE: Switch the unit into the cooling mode and press this button to de- or activate the sleep mode.
6. TIMER: Turn the unit on and leave it in standby mode, then press this button to set the timer. You can set the
desired on or off time using the ▲ and ▼ keys (1h-24h).
⑪ ⑫
11
12
13
14
15
16
17
18
19
⑮ ⑯ ⑰ ⑱ ⑲
Indicator for high fan speed
Indicator for low fan speed
Timer indicator
Display
Sleep mode indicator
Cooling mode indicator
Dehumidifying mode indicator
Fan mode indicator
Power indicator
16

Publicidad

Tabla de contenido
loading

Tabla de contenido