Suntec Wellness Klimatronic MOVE plus Manual De Instrucciones página 17

Tabla de contenido

Publicidad

Remote control
1. Power
2. Timer
3. Mode
4. Temperature +
5. Temperature -
6. Fan
7. Sleep mode
Functions
Cooling mode
After starting the unit it will automatically start with default settings: cooling mode, 22° C, low fan speed.
Press the MODE button to set the cooling mode, the cooling mode indicator lights.
Press the ▲ or ▼ to adjust to the temperature (16° C – 31° C).
Press the FAN button to adjust the fan speed (high or low).
Fan mode
Press MODE button to turn on the fan mode, the fan mode indicator lights.
Press the FAN button to adjust the fan speed (high or low).
Temperature setting and sleep mode cannot be set.
Timer
In standby mode, press the TIMER button to set the on-time. The timer indicator lights up.
After starting the unit press the TIMER button to set the off-time. The timer indicator goes off.
Dehumidifying mode
Drücken
Sie
Entfeuchtungsmodus-Indikator leuchtet.
Temperatureinstellung und Schlafmodus können nicht eingestellt werden, die Geschwindigkeit des
Ventilators bleibt automatisch niedrig.
Schlafmodus
Press the SLEEP MODE button, the fan speed will be automatically adjusted on the low level.
If the sleep mode will be activated during operation in the cooling mode, the temperature will rise an
hour later by 1° C, two hours later by another 1° C and then remains constant.
Sleep mode is not adjustable during dehumidifying and fan mode. If the water tank is full, the standby
mode will switch on, settings will be deleted and the sleep mode will be disable.
Compressor protection
The compressor requires a start-up phase and will start three minutes later on after turning on / reboot
the device.
Important:
Emptying of the water tank
The unit has an automatic water evaporation system. Condensed water will be used to cool the
condenser. Thus the cooling performance will be increased and the energy will be saved.
die
Taste
MODE,
⑤ ④
um
den
Entfeuchtungsmodus
einzustellen,
der
17

Publicidad

Tabla de contenido
loading

Tabla de contenido