Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Program Play

With this program play function, you can
program up to 32 tracks in any desired
order.
Before beginning:
OProgramming can be done only with the
remote control unit.
OProgramming can be done only in the
stop mode.
∑ Programming with numeric buttons
1. Press the CD button.
Then, the numeric buttons will work as
selection buttons of track on the disc.
2. Press the program button in the stop
mode.
The display will show as follows:
3. Select the desired tracks by pressing
the numeric buttons.
Example: 2T6T12
The 2nd, 6th, and 12th tracks have been
programmed in sequence.
Track No.
4. Press the play (∏) button.
The program play will start in the
programmed order.
Notes:
OIf you press the program button while
programming, programming will cease
and change into the program recall
mode.
OIf you stop playing, the programmed
contents will disappear from the display,
but they are not lost from the memory.
Press the program button when you
want to recall the programmed contents.
∑ Programming with music skip
button
1. Press the program button in the stop
mode.
2. Select the desired track by using the
music skip (Ú/Æ) button.
Example:
Track No. 5
3. Press the program button again.
Then, the 5th track has been
programmed as program No. 1.
4. Repeat step 2 and step 3 to continue
programming other tracks.
5. Press the play (∏) button.
The program play will start in the
programmed order.
Note:
If you press the program button twice
continuously
programming will cease and change into
the program recall mode.
Program No.
For your reference:
O"FULL" appears on the display when the
33rd track has been programmed (no
further programming is possible).
OTrack numbers not actually on the disc
cannot be programmed.
OThe programmed contents are not lost
even if the unit is turned off, but they are
lost when the disc tray is opened.
OThe unit will stop automatically when all
the programmed tracks have finished
playing, and the programmed contents
disappear from the display, but they are
not lost.
OIt is possible to program with the disc
tray opened. Track numbers not actually
on the disc will be automatically skipped
when the disc starts playing.
while
programming,
_ 9 _
∑ Recalling the program
As the programmed contents are not lost
even if you stop playing or turn off the unit,
you can recall them later.
1. Press the program button.
Then the first programmed track will
appear on the display.
2. Press the button repeatedly if you want
to check the programmed contents.
Each time the button is pressed, the next
programmed contents will appear on the
display in the programmed order.
3. Press the play (∏) button if you want to
play the disc in the programmed order.
∑ Erasing all the programmed
contents
1. Press the program button.
2. Press the clear button and hold it for
longer than 2 seconds.
Then, all the programmed contents will
be lost, and they are also lost when the
disc tray is opened.
Note:
The program button and the clear button
can work only in the stop mode.
* Changing the programmed contents
ODeleting:
Undesired tracks can be deleted from
the originally programmed contents.
1. Press the program button repeatedly
until the track number that you want to
delete appears on the display.
2. Press the clear button.
Then that track number will be deleted
from the programmed contents.
If you press the button repeatedly, the
next programmed tracks will be deleted
one by one each time the button is
pressed.
∑ Adding after the last track:
1. Press the program button repeatedly
until "END" appears on the display.
2. Enter new tracks in the same way as
normal programming after "END"
disappears from the display
∑ Adding to any position:
1. Select the program number which you
want to add a new track to by pressing
the program button.
2. Enter the new track in the same way as
normal programming.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido