Basic Operation - Teac CR-H238i Manual Del Usuario

1 Press the STANDBY/ON button to turn the unit on.
Standby indicator
When the unit is turned on, the standby indicator goes
off.
2 Press the SOURCE button repeatedly to select a
source.
The source changes as follows:
TUNER FM TUNER AM
AUX2 IN AUX1 IN
< To listen to an external source connected to the AUX
IN jack, select "AUX 1 IN" or "AUX 2 IN".

Basic Operation (1)

1 2
CD USB
iPod SD CARD
3
< You can use the AUX 1, AUX 2, TUNER, CD, USB, SD,
and iPod buttons on the remote control unit to select
a source directly.
3 Play the source, and gradually turn up the volume
to the required level by turning the VOLUME
knob.
17