DeWalt DW079 Manual De Instrucciones página 15

Láser rotativo
Ocultar thumbs Ver también para DW079:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

In Manual Mode:
The arrow buttons (O) are used to tilt the laser head up or
down in the X or Y directions as marked on the protective roll
cage of the laser unit.
REMOTE CONTROL: SPEED/ROTATION BUTTON
The speed/rotation button (Q) is used to adjust the speed of the
laser beam through its 4 preset speeds.
NOTE: The speed/rotation button performs the same function as
the speed/rotation button on the control panel of the laser unit.
REMOTE CONTROL: SCAN MODE BUTTON
The scan mode button (R) is used to make the laser head sweep
back and forth, creating a short, bright laser line. This short line is
much brighter and more visible than when the unit is in full rotation
mode.
Using Scan Mode:
To enter Scan Mode, push and release the scan mode button.
To exit Scan Mode, push and release the button again.
The size and direction of the scan zone can be controlled
with the arrow buttons on the laser unit control panel or the
remote control. For a more detailed explanation, refer to
Arrow Buttons under Laser Control Panel Buttons.
IMPORTANT: The remote control cannot be used for User
Defined Scan Mode.
REMOTE CONTROL: PUBLIC AND PRIVATE MODE
The DW079 Rotary Laser and the DW0794 Remote Control each
have the capability to operate in either Public Mode or Private
Mode. For the laser and the remote control to work together, they
must both be set to the same mode.
Public Mode
The remote control sends signals that can potentially be
received by multiple laser units as well as other models of
laser units. This is the normal, default operating mode for the
DW0794 remote control.
To activate Public Mode:
• Press and hold the speed/rotation button (Q) (open
padlock symbol beside the button) for 4 seconds.
• After an 8-hour period of inactivity, the remote control
will automatically enter Public Mode.
• After replacement of its battery, the remote control will
automatically enter Public Mode.
Private Mode
The remote control sends signals that can only be received by
the designated laser unit.
To activate Private Mode:
• Press and hold the remote control scan mode button
(R) (closed padlock symbol beside the button) and at
the same time, press and hold the scan mode button
(F) on the laser unit control panel (closed padlock
symbol).
After 4 seconds, both the remote control and the laser
unit will enter Private Mode. As confirmation, the laser
unit will beep and the laser unit control panel LED (L)
(next to the closed padlock symbol) and the remote
control LED (T) (next to the closed padlock symbol) will
flash.
Height of Instrument Alert
The DW079 has a built-in alarm feature that alerts the operator if
the unit is disturbed after the unit has self-leveled. The laser unit will
stop rotating, the control panel LED indicator lights will flash and the
beeper will sound.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido