SilverStone SUGO Serie Manual De Instrucciones página 3

SUGO SG09
Redefining performance in small form factor computing
Material Plastic front panel and steel body
Model SST-SG09B (Black)
Motherboard Micro ATX, Mini-DTX, Mini-ITX
Drive Bay Exposed
Internal
Cooling System Rear
Top
Left
Right
Expansion Slot 4
Front I/O Port USB 3.0 x 2 (backwards compatible with USB 2.0)
audio x 1, MIC x 1
Power Supply Optional standard PS2 (ATX) up to 180mm*
Expansion Card Compatible up to 13.3" long
Dimension 220mm (W) x 295mm (H) x 354mm (D), 23.0 liters
Extra support two Kensington locks
*If you intend to utilize all hard drive slots, please remove all unused power supply cables. These unused
cables may cause problem with the installation. SSDs are highly recommended in place of hard drives.
*Maximum length for PSU is 180mm, we recommend 160mm due to varying connector locations on PSUs
and the unique structure of SG09. We do not promise that all retail PSUs on the market can be installed in
the SG09. Please refer the guides provided in this manual to select your PSU.
12.7mm/9.5mm slim optical drive x 1
3.5" x 2 *, 2.5" x 4*
1 x 120mm 1200rpm 22dBA
180mm Air Penetrator 700/1200rpm, 18/34dBA
(backward compatible with 140mm)
1 x 120mm 1200rpm 22dBA (backward compatible with 92mm)
2 x 80/92mm fan slot
80mm fan slot
2