Publicidad
Idiomas disponibles
Idiomas disponibles
9.
Work speed control wheel
10. Switch for pendulum action setting
11. Blade protection
12. Edge guide locking screws
13. Laser switch
14. Laser beam aperture
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1.
Hexagonal key
2.
Dust extraction adaptor
3.
Edge guide
4.
Transport case
BLADE INSTALLATION
Disconnect the power tool from power supply.
Installation and removal of the blade is toolless.
● Set the switch for pendulum action (10) to position "III" and lift the guard (8) (fig. A).
● Pull lever of the blade holder (7) and slide blade into the blade holder (7) to mechanical stop (blade
teeth should be faced forward) (fig. B).
● Important! Make sure the blade is properly positioned in the guiding roller (6).
● Release the lever of the blade holder (7) and ensure the blade is properly fixed.
● Blade removal is similar to installation, only the sequence of actions is reversed.
Use blades suitable for T-shank holder mechanism, as shown on fig. C.
DUST EXTRACTION
To improve dust extraction from processed material surface, the jigsaw is equipped with own dust blow-off
and extraction system, which cleans the surface being cut. Dust blow-off and extraction system is more
efficient when the guard is lowered.
● Slide adaptor (3) into the dust extraction stub (4) and turn counter-clockwise to secure (fig. D).
● Attach suction hose of the dust extraction system to the adaptor (3). Make sure the connection is
tight.
BLADE STORAGE
Jigsaw features convenient clip for blade storage in the rear part of the footplate (5).
- 1 pce
- 1 pce
- 1 pce
- 1 pce
PREPARATION FOR OPERATION
18
Publicidad
